ON-LINE MONITORING

Monitor and analyze key parameters on critical assets. Monitoring devices can be used individually or combined for a diagnostic monitoring platform.

Condition Monitoring Platform for Transformers

The doblePRIME™ Transformer Condition Monitoring System gives you a clear, consolidated means to assess overall transformer condition.

Key Features

  • Measures, collects and analyzes data for on-line condition assessment
  • Aggregates and analyzes data from monitoring devices, sensors and operational data sources
  • View data in a comprehensive dashboard
  • Build and scale your doblePRIME platform as budget and necessity requires – whether it is one device or an integrated platform
  • Easily integrates into an asset risk management system, such as dobleARMS™
Bushing Monitor

The doblePRIME IDD™ Bushing Monitor detects deterioration in bushings, finding abnormalities in the insulation and issuing actionable alerts.

Key Features

  • Capture bushing current waveforms in real time
  • Calculates values for power factor and capacitance
  • Records data at user specified intervals, or ad hoc
  • Displays alerts locally and remotely
  • Intelligent Expert System learns what is normal for your bushings
  • Notifications based on latest analysis techniques – and built on Doble’s decades of experience in the field
Partial Discharge Monitor

The doblePRIME PD-Guard™ continuously monitors partial discharge (PD) in equipment such as transformers, rotating machines, cables and switchgear.

Key Features

  • Monitor partial discharge and configure monitor via computer, tablet or web-enabled device
  • Works with a variety of sensors including antenna for airborne PD, CTs for individual or bundled conductors, UHF drain valve probes for in-tank applications and bushing tap connectors
  • Built-in Expert System learns PD behavior and indicates changes in frequency and/or severity of measured PD levels
  • Alarm relays for external notification
  • Broadband RF signal detection including peak, average and quasi-peak
Moisture-in-oil Monitor

The doblePRIME DOMINO™ provides real time data for moisture in oil, giving indications of relative saturation or absolute ppm levels. This is useful information, especially when a transformer is being loaded in excess of nameplate or when the transformer is undergoing abnormal load cycles.

Key Features

  • Continuous results in parts per million (ppm), relative saturation and temperature
  • Monitors oil reconditioning in systems as small as a single filter cartridge – to as large as a mobile or stationary processing plant
  • Helps determine filter changeout, process efficiency and when to terminate processing
  • Readout is directly in ppm — no need for charts and conversions
Multi-gas Dissolved Gas Analysis Monitor

The Morgan Schaffer Calisto online DGA monitors provide the data you need for early detection of impending failures, cost-efficient condition-based maintenance and optimal loading decisions.

Key Features

  • Gas chromatography (GC) technology for precise and accurate readings
  • Built-in moisture and solubility coefficients for all common insulating fluids
  • Proprietary Morgan Schaffer cell and chromatographic method
  • Enhanced self-diagnostics
  • Vacuum tolerant
  • Enclosure temperature and oil temperature conditioning
  • Factory-installed carrier gas manifold for trouble free start-up and convenience
  • Built-in oil circulation and flow monitoring
  • Communication protocols: Modbus, DNP3, optional IEC 61850
  • Substation hardened communication electronics
Communication Gateway for doblePRIME

doblePRIME Analytics™ is a communication gateway, online data hub and data analysis device at the core of the doblePRIME Condition Monitoring Platform.

Key Features

  • Aggregates and analyzes data from monitoring devices, sensors and operational data sources
  • Comprehensive dashboard view for all components integrated into the doblePRIME Condition Monitoring Platform, e.g. DGA, thermal, partial discharge and bushing monitors
  • Accepts direct inputs from analog sources, such as temperature probes and V/I measurement devices
  • Intelligent Expert System with advanced analytics learns system characteristics
  • Provides condition and operation status analyses
Multi-Function Data Recorder

The doblePRIME iO is a data recorder that accepts current, voltage, temperature and relay inputs to your doblePRIME system.

Key Features

  • Multiple analog/digital inputs, including currents, voltages, and temperature sensors
  • Stores and displays data via the doblePRIME user interface
  • Ethernet, USB and RS485 interfaces
  • Modbus and DNP3 communication protocols (IEC 61850 available on request)

OFF-LINE TESTING & ASSESSMENT

Analyzers and diagnostic software for testing insulation condition and operation of substation apparatus.

High Voltage Apparatus Tester

The M4100 is the industry standard for power apparatus and insulation testing. Its unique combination of test capabilities and artificial intelligence analysis software makes it the power industry’s most trusted Power Factor/Tan-Delta instrument.

Key Features

  • Power Factor/Tan Delta testing to confirm insulation integrity and quality
  • Capacitance testing to measure physical changes that may have occurred to the apparatus
  • Turns ratio testing to detect shorted turns or winding damage
  • Leakage reactance/short circuit impedance testing to evaluate winding deformation
  • Single phase excitation current testing to evaluate the transformer magnetizing circuit
  • Capacitor bank testing to detect deteriorating or failed capacitors within a bank
  • Easy and accurate testing with Doble Test Assistant (DTA) software
High-Voltage Asset Analyzer

The Doble M7100 High-Voltage Asset Analyzer is your complete solution for high-voltage testing.

Key Features

  • Built-in Low Voltage/High Current Multi-Frequency Source
  • Combined Source and Measurement Test Leads
  • True 4-Terminal measurements
  • Intuitive design where the color or number is the connection
  • Patented dual high-voltage leads allow you to switch between Source and Measurement – both capabilities are within each HV lead
  • Enhanced safety features include new safety switch design
Sweep Frequency Response Analyzer

Use the Doble M5400 Sweep Frequency Response Analysis test set to investigate mechanical integrity of transformers, reactors and other equipment consisting of windings. If you measure the frequency response of a winding then you can identify winding movement.

Key Features

  • Instrument sends excitation signals to transformer and measures the returning signals across a broad frequency range
  • Provides a frequency response measurement from 10 Hz to 25 MHz
  • Measures frequency response at logarithmically spaced intervals of 1.2%
  • Auto-scales each frequency measurement for an overall dynamic range of 80 dB with a ±1 dB accuracy
  • Highest combination of dynamic range and accuracy available
Doble Test Assistant Software

Doble Test Assistant software is your comprehensive software tool for the collection, analysis and management of test results for the Doble M-Series family of instruments.

Circuit Breaker Test System

The Doble TDR9100 Circuit Breaker Analyzer is a state-of-the-art circuit breaker test set for testing all types of circuit breakers with efficient and accurate performance measurements.

Key Features

  • Features up to 4 breaks per phase, 3 motion channels and 6 event channels
  • Testing Flexibility – the TDR9100 can be ganged as a set of 2 or 3 units effectively doubling or tripling your usable channels and main contacts for up to 12 breaks per phase
  • User-friendly T-Doble Software features an intuitive control panel for quick, efficient and simple testing of circuit breakers
  • Measure additional parameters in the mechanism cabinet using Doble or 3rd party transducers
Automatic, 3-Phase Transformer Ratio Finder

The TRF-250 is Vanguard’s fourth generation transformer turns ratio tester. This latest design provides a higher turns-ratio test voltage of 250Vac, provides a wireless Bluetooth PC interface, and features a 44-key “QWERTY”-style membrane keyboard. All these features greatly improve the accuracy of the turns ratio readings, ease of operation, and reliability.

Key Features

  • Ratio Range: 0.8 – 50,000 to 1
  • Capable of detecting 130 different 3-phase transformer types defined by ANSI, IEC, and Australian standards
  • 4 test voltages: 4Vac, 40Vac, 100Vac, and 250Vac
  • Phase angle and excitation current measurement
  • Bluetooth and USB PC interfaces
  • 4.5-inch wide thermal printer (optional)
Current Transformer Test Set

The EZCT-2000C is Vanguard’s third-generation microprocessor-based current transformer test set. Designed specifically for CT testing, the EZCT-2000C has the following outstanding features that can greatly increase productivity and save time during the commissioning stage

Key Features

  • Performs CT excitation, current-ratio, polarity, and phase angle tests
  • Measures insulation resistance and winding resistance of the CT seconday windings
  • Measures the CT’s secondary burden
  • Test record header information including company, substation name, circuit ID, manufacturer, CT serial number, operator name, and test record-comments
  • Built-in 4.5-inch wide thermal printer
  • Plot Multiple Saturation Curves
  • Stores up to 128 CT test plans and 140 test records internally
  • USB, Bluetooth, and USB Flash drive interface
Digital Circuit Breaker Analyzer

The CT-8000 S3 is Vanguard’s fourth generation EHV circuit breaker analyzer. The CT-8000 S3 is available with 3 (part number 9103-UC) or 6 contact timing channels (part number 9104-UC). The CT-8000 S3 can fully analyze a circuit breaker’s performance by measuring the main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes. Also, an outstanding feature of the CT-8000 S3 is the ability to perform dynamic resistance tests on circuit breaker contacts.

Key Features

  • Fully analyze circuit breaker’s performance by measuring main contact and resistor contact time, stroke, velocity, over-travel, bounce back and contact wipes
  • Perform dynamic contact resistance test
  • USB computer interface
  • USB Flash drive interface (Flash drive not included)
  • Store up to 200 test records and 100 test plans internally
  • Initiate Breaker Operation
  • Built-in 4.5″ wide Thermal Printer
  • Rugged “QWERTY” style membrane keypad
  • Optional “On-line” Timing Mode
  • Optional dual ground testing mode
  • Optional Bluetooth wireless computer interface
Portable AC/DC Power Supply

The Vanguard UPS S3 is an AC/DC adjustable output power supply designed to operate substation circuit breakers. The UPS S3’s AC and DC voltage sources can supply up to 10 Amperes during the circuit breaker coil energization and circuit breaker charging motor operation. Powered by a single phase 90-120 Vac voltage source, the UPS S3 provides an isolated adjustable AC/DC voltage source. Output voltages are variable via the front panel control knob.

Key Features

  • AC/DC adjustable output power supply designed to operate substation circuit breaker
  • Can supply up to 10 A during the circuit breaker coil energization and circuit breaker charging motor operation
  • Variable AC output voltage source (10-140 Vac) rated at 140 Vac @ 9 A continuous
  • DC voltage source (10-200 Vdc) rated at 180 Vdc@9 A (2 seconds) or 180 Vdc @ 2 A continuous
  • Both AC & DC voltage source outputs protected by a circuit breaker
40 A three-phase winding resistance meter with demagnetization

The TRM-403 is a three phase transformer winding resistance meter that allow the user to connect all test cables to the transformer bushings. The unit will then measure the transformer resistance value for each of the phases without the need to disconnect and reconnect cables for each phase. The TRM-403 can provide a fast and stable reading of very large transformers by utilizing a 60Vdc power supply. It is capable of outputting a selectable test current from 1A to 40A. Since the TRM-403 can accurately measure resistance from 1 micro-ohm to 500 Ohms, it can be used as a micro-ohm meter to measure EHV circuit breaker contact resistance, or for any low resistance measuring application.

Key Features

  • Perform three phase test on a transformer without the need to switch cables
  • Can provide individual Delta winding resistance values
  • Can provide individual Wye (with no neutral) winding resistance values
  • Demagnetize transformer after test
  • Selectable test current from 1A to 40A
  • Computer control via RS-232C, USB, or Bluetooth interface
  • Built-in 2.5″ wide thermal printer
600 A True DC Micro-Ohmmeter

The DMOM-600 is specifically designed for testing EHV circuit-breaker contact resistances, bushing contact joints, welding joints, or for any low-resistance measuring application. This high current and very lightweight (33 lbs/ 15 Kg) micro-ohmmeter is designed to meet the IEEE C57.09-1999 (5.15) requirement for testing circuit breaker contact resistance.

Key Features

  • Measures circuit breaker contact resistance with safety ground on (with the Dual Ground option)
  • Stores test records on-board or on external USB Flash drive
  • 10 to 600A programmable test current
  • Built-in 2.5″ wide thermal printer
75 k Vdc Vacuum Bottle Tester

The VBT-75 S2 is Vanguard’s second generation microprocessor-based, portable, 75kV dc vacuum bottle tester. This lightweight, portable tester is designed for testing circuitbreaker vacuum bottles in the field and at the shop.

Key Features

  • 10 kV to 75 kVdc test voltages in 5 kV steps
  • 100, 200, 300 micro-amperes programmable test current
  • Displays test voltage and test current
  • “Pass/Fail” indicator and message
  • Very lightweight
  • Shipping case included
Maximize capabilities of M-Series analyzers

Doble offers a series of accessories to complement your M-Series asset analyzers.

IN-SERVICE TESTING & ASSESSMENT

Avoid costly outages by testing in-service equipment with portable diagnostic tools for partial discharge and oil analysis.

Partial Discharge Surveyor

The Doble PDS100 Partial Discharge Surveyor is a radio frequency interference (RFI) surveying tool that is designed for partial discharge measurement in a live substation.

Key Features

  • Uses RFI technology to identify and locate defects
  • Detect harmful PD by the electromagnetic energy emitted from the area of activity
  • Compare reference baseline to readings from inside the substation
  • Spectrum and time modes
  • Store recordings in the instrument and later transfer to a PC for further analysis with PDViewer software
  • Rugged, light-weight, hand-held instrument
  • Works with a variety of sensors, probes and antennae for various applications
PD Surveyor with EMI Capabilities

The PDS200 Surveyor is a partial discharge surveyor tool with EMI capabilities. It identifies and analyzes radio frequency (RFI) and lower frequency electromagnetic (EMI) emissions. These are associated with faulty or degraded insulation and other system defects.

Key Features

  • Easy to use, handheld device with large display screen
  • Captures the electromagnetic emissions in the RFI and EMI spectrum and displays a “fingerprint” of the defect causing the radiation
  • Select measurement parameters to maximize sensitivity to emissions
  • Synchronize signal capture to the power cycle to facilitate phase resolved PD analysis
  • Connect to a variety of sensors (HFCTs, probes, directional antenna) for different applications
  • Synchronous sampling and display of detector outputs provides discrimination of telecommunication carriers, noise and discharge phenomena
  • Logging of key parameters for trending of emissions
For Rotating Machine & Power Plant Applications

Doble’s EMI Surveyor is an in-service, EMI testing solution that can identify more than 70 different electrical and mechanical defects in generators, motors, bus duct and other high-voltage (HV) electrical plant equipment.

Key Features

  • Portable, easy to use, handheld devices
  • Packaged kit includes all accessories needed for a comprehensive EMI assessment
  • Provides dual EMI and RFI partial discharge spectrum capabilities
  • Easily connects to multiple sensors including high-frequency current transformers, UHF drain valve, TEV probes, and directional antennae for various applications
  • Acoustically listen to radio noise generated from defects
  • Signal can be power cycle synchronized to facilitate phase resolved PD analysis
Portable Dissolved Gas Analyzer

To make informed decisions on site, you need fast and reliable data. Myrkos portable gas analyzers provide laboratory quality DGA data where you need it, when you need it. In remote locations, to confirm monitoring data, or whenever on-site diagnosis is required, Myrkos portable gas analyzers provide results as accurate as a lab through our proprietary Shake Test® syringes.

Key Features

  • Interference-free measurement of all nine gases
  • Lowest detection limits
  • Built-in diagnostic tools and solubility coefficients for all common insulating oils
  • Fast measurement time: results within two minutes of injection
  • Intuitive step-by-step on-screen operation
  • Proven gas chromatography (MicroGC) technology
  • Extraction and gas measurement technologies recognized by ASTM 3612 and IEC 60567
  • Interface software in six languages
  • On-screen oil sampling and gas extraction instructions
  • User-friendly calibration system
  • 7 hours of cordless operation
  • Over 40 hours of operation between carrier gas refills
Dielectric Fault Analyzer

The DFA100 Dielectric Fault Analyzer is a handheld survey tool used to identify and locate partial discharge, particles, and mechanical defects.

Key Features

  • Three measuring modes: continuous, phase and pulse
  • Use the simple interface to upload test results to a PC or download previous data and nameplate configurations
  • Outstanding durability for field use and produces high-quality results with high repeatability, allowing for rapid and reliable decision-making
  • Can operate up to 4 hours on one charge
RFI & Acoustic Signal Surveyor

Use the Doble DFA300 to identify and locate insulation defects.

Key Features

  • Combination tool uses both RFI and acoustic technology
  • Registers RFI from apparatus with insulation problems including PD and arcing
  • Locate and diagnose internal problems using the acoustic sensor on grounded surfaces
  • Easy to use, handheld device with large display screen
Portable Moisture in Oil and Dewpoint Analyzer

The Doble DOMINO USS (Ultimate Sampling System) gives you a fast, efficient way to measure water content in oil and/or the dewpoint of a gas.

Key Features

  • Get accurate results in six minutes or less
  • Analyze different oil types: new and in-service transformer oil, very aged transformer oil >0.18 mg KOH/g), silicone and natural esters (vegetable oil dielectrics)
  • Sensor can quickly be connected to a transformer valve or other oil-filled electric device for readouts of water content in ppm
Leakage Current Monitor

The Doble LCM500 Leakage Current Monitor can measure condition while a surge arrester is still in service, measuring the quality of the metal oxide blocks and helping manage the risk of failure.

Key Features

  • Portable, battery-operated instrument for regular condition assessment of surge arresters
  • Unique identification of each surge arrester makes data management easy
  • Instrument can store 1000 surge arrester IDs and measurements performed in the field
  • Defines individual surge arrester types including operational parameters
  • Perform evaluation of groups of surge arresters, e.g. by type or region, with included software
  • Rated in accordance with IEC 60099-5 for field monitoring of metal oxide surge arresters
Maximize benefits of PD test instruments

Whether you need a sensor, measuring impedance, coupling capacitor or calibrator, we offer a complete line of Doble partial discharge testing accessories to help refine your PD testing capabilities.

PROTECTION TESTING

Test, manage data and generate reports with diagnostic equipment and software for testing all types of protective relays and schemes.

Power System Simulator

The Doble F6150e is a versatile protective relay tester for testing relays and schemes.

Key Features

  • Performs standard relay calibration and verification testing of high burden and microprocessor relays
  • Analog testing of 1A and 5A protection devices
  • Performs state simulation and transient testing
  • Tests 0.2-class metering CTs and transducers
  • Implements end-to-end testing of communications-based schemes with GPS time syncing
  • Maximum of 12 sources (six voltage, six current) configurable for bench testing and proof-of-concept testing for complicated relaying schemes
  • Delivers full VA power with resistive, inductive and capacitive loads at maximum current rating (6×35, 3×70, 1×210 amps)
  • Control all sources from a tablet device for basic, manual protection testing
Power System Simulator

The Doble F6150sv protective relay test equipment is a versatile solution for testing IEC 61850-based protection devices and schemes.

Key Features

  • Simulate three streams of IEC 61850 9-2LE sampled values through one fiber-optic port and one copper (RJ45) port (F6870 Sampled Values option required)
  • Wi-Fi capable (optional)
  • Simulates (publishes) and subscribes to IEC 61850 GOOSE messages involving multiple IEDs (F6860 GSE Configurator option required)
  • Performs standard relay calibration and verification testing of high burden (electromechanical), solid-state, and microprocessor-based relays
  • Delivers full VA power with resistive, inductive and capacitive loads at maximum current rating. The following ranges are available with the F6005 Enhanced Rating Option: (6 x 35, 3 x 70, 1 x 210 A).
  • Performs state simulation and transient testing
  • Tests 0.2-class metering CTs and transducers
  • Implements end-to-end testing of communications-based schemes with GPS time syncing
  • Maximum of 12 high-level analog sources (six voltage, six current) configurable for bench testing and proof-of-concept testing for complicated relaying schemes
Protective Relay Test System

The MTS-5100 is the only all-in-one relay test set with a direct front panel interface for all functions, without exception.

Key Features

  • Large 10.1” display
  • Six AC/DC Currents
  • Four AC/DC Voltages
  • 12 Contact / 0-250Vrms Voltage inputs
  • Four contact outputs
  • Transducer voltage/input
  • GPS input (antenna included)
  • IRIG input, IRIG output
  • IEEE 61850 GOOSE messaging
Panel Meter & Transducer Tester

The MTS-2000 is a highly-portable instrument for testing and calibrating transducers and panel meters. It has two precision AC/DC sources. One channel provides up to 150 volts RMS. The other channel is switchable, supplying up to either 150 volts RMS or 5 amps RMS. For high-voltage meters, you can operate the channels in series to get 300 volts RMS. That’s enough to test and calibrate nearly all the panel meters and transducers found in power utility substations.

Key Features

  • Tests and calibrates the following meters and transducers: voltage, current, power, frequency, power factor
  • Generate 0-20mA transducer currents
  • Simple and intuitive user interface
  • “Quick Set” to cycle through test values for rapid testing
  • Small, lightweight and rugged
Multi-Function Power Meters

The MTS-1010 and MTS-1030 Multi-function power meters are portable, digital meters developed specifically for power related applications in the relay, metering and Instrumentation & Control departments. 

Key Features

  • Ten simultaneous measurements
  • True RMS, fully autoranging
  • High ampacity current inputs
  • High intensity LED displays
  • Optimized for relay and meter applications
  • RS-232C interface
  • Light weight, easy to use
  • Annunciators identify displayed reading
High Power Protective Relay Testing

Choose from Doble’s F6300e and F6350e External Amplifiers for your specific protection testing needs and requirements.

Protection Testing Software

Doble Protection Suite software is a complete, no-compromise, protection testing solution. Run manual and automated tests for protection-scheme verification, including IEC 61850 sampled values and GOOSE schemes.

Protection Testing Software

Simulate, monitor and test IEDs on your digital substation network with Doble’s 61850 TesT Software.

Key Features

  • Loads multiple IEC 61850 substation configurations or various types of SCL files (ICD, IID, CID, SED, and SCD)
  • Retrieves and generates IED and SCL files that comply with IEC 61850 parts 6 and 7 (edition 1 or edition 2)
  • Browses the IED’s data model
  • Scans and captures substation network traffic for GSE and SV messages and their datasets
  • Logs GSE messages and reports from IEDs; log files can be saved for further analysis later
  • PC-based IED simulator for publishing GOOSE messages and client/server reports automatically using scripts, or manually
  • Saves GSE and SV signals in COMTRADE format for later viewing and analysis
Protection Testing Software

Doble’s F6TesT protective relay testing software is a visually-robust software for simple, fast, and automated testing, including the testing of complete protection schemes.

Key Features

  • Create reusable, standardized test routines by using a combination of test modules
  • Perform acceptance, commissioning and maintenance testing
  • Test modules support spreadsheet-like calculations using variables
  • Relational database system to store relays with protection functions, test plans and historical test data
  • Document and report all your relays and functional settings, relay characteristics, test methods and maintenance test history
  • Tracks maintenance test schedules and previously performed tests; alerts when a scheduled maintenance is getting close
  • Library of impedance and differential relay models from various relay vendors
Protection Testing Software

ENOSERV RTS® protection testing software helps standardize elements of your relay testing program. It is ideal for testing and capturing data during commissioning and field performance/compliance testing.

Key Features

  • Works with equipment from a variety of test set manufacturers
  • Test routine library for all different types of relays
  • Downloads and save microprocessor relay settings
  • Reduce settings errors by comparing “as found” with “as left” settings
  • Use FasTest function to program additional equipment tests, including step-by-step instructions
  • Seamlessly connects to ENOSERV PowerBase
Protection Asset and Test Database

ENOSERV PowerBase® is the premier application for administrators to manage and report on protection asset testing, settings, maintenance and engineering records. It helps simplify NERC PRC-005 compliance and trending. ENOSERV PowerBase lets you organize and consolidate test and settings data from disparate applications, spreadsheets and files.

Key Features

  • Data storage system for relay test, settings, maintenance and engineering records
  • Powerful, user-friendly report generator: single-criteria lists; multiple-criteria comparisons, trends, analyses; file searches; graphical displays of test results and more
  • Test result management for simplified NERC PRC-005 compliance and trending
  • Reliable data backup for ENOSERV RTS and Protection Suite
  • Customizable dashboards to track data
  • Use built-in work order features or connect to existing work order management systems
  • Automatic monitoring and notification of changes to device and settings status
Customize your power system simulators

Testing requirements can vary from team to team and company to company. That’s why Doble’s protective relay testing equipment is customizable.

Maximize your protection testing program

Protection testing programs can vary from team to team and company to company.

SECURITY & NERC CIP

Compliance solutions derived from our keen understanding of the utility work processes — designed to improve productivity.

Patching for the Field

Unpatched systems are a big security risk. Regulatory standards such as NERC CIP-007 and NERC CIP-010 require timely discovery and application of security updates. When it comes to field devices such as asset testing laptops and protective relays, which are remote and often not network connected, utilities struggle with this task.

Key Features

  • Advanced patch management solution for industrial applications.
  • Covers all aspects of patch management, from discovery to delivery.
  • Covers all types of products, including substation and field devices.
  • Covers all types of product updates, including security, functional, and workarounds.
  • Security portal with patch management workflow and extensive evidence at your fingertips.
Workforce optimization & data solutions

Applying data integrity and data security best practices to your business processes, Doble’s Field Force Automation solutions standardize your testing and data collection programs through a combination of rugged controllers, testing software, custom engineering and data management processes.

Key Features

  • Customizable program that can automate 7 manual steps in traditional testing workflows
  • Controllers configured as locked-down devices; rugged, secure devices guaranteed to connect to your Doble test equipment
  • Easy system-wide software version control; no need for IT support
  • Controlled sharing and distribution of documents between field and office such as manuals, SOPs, bulletins
  • Field-fillable forms automate data collection previously recorded and maintained on paper, e.g. safety tailboards, inspection reports
Doble Universal Controller

The Doble Universal Controller™ is a ultra-rugged tablet device powerful enough to operate Doble’s suite of high voltage test equipment and software solutions while being tough enough to withstand the rigors of electrical field testing.

Key Features

  • Convenient app-style interface launches Doble diagnostic software, seamlessly connecting to your test equipment
  • Withstands operational 4’ drop to concrete and operational 7’ drop to plywood
  • Impenetrable to dust and debris
  • Operates in -30°F to 140°F temperatures
  • Intel® i5- 4300 Processor with Turbo Boost
  • Sunlight readable screen
  • Built-in Bluetooth

ENTERPRISE ASSET MANAGEMENT

Field force automation, asset risk and data management for decision-making from the field to the office.

Asset Risk Management System

dobleARMS® is an asset risk management system powered by a sophisticated suite of analytical tools infused with Doble’s expertise in asset life-cycle and associated risks.

Key Features

  • Meets FERC, NERC and NIST security and Smart Grid Standards
  • Flexible, secure and scalable infrastructure supporting off-line and real-time data collection from a variety of data sources
  • Places a non-proprietary layer of model management on top of “point-based” protocols
  • Eliminates the need to manually manage interface points and changes
  • Easily drill down to the details you need
Database Software

DTAWeb is the premier asset management software and data storage solution for users of Doble test equipment and oil lab results.

Key Features

  • Advanced editing, merging functions and database cleanup tools
    • Edit nameplate information from within database
    • Perform mass updates on companies, divisions and locations
    • Merge identical apparatus within database, where separate files were created with different nameplate information
  •  Built-in analysis tools
    • Tabulate test results
  • Remote, Doble-hosted database with “one-click” backup
  • Analysis capability and data accessibility
  • Active Directory integration
Data management support solutions

Standardizing testing and data management processes across a division or company can be a complex and time-consuming project.

Key Features

  • Data clean-up, data conversion, test plan creation, “historic” file conversion and options for ongoing support
  • Data management options are available for a variety of test data including DTA, T-Doble, SFRA, PD, and ProTesT files
  • Choose which options are needed for your organization
  • Data management projects are tailored to your business practices

EQUIPMENT

We work with our clients and suppliers to offer solutions that simplify the condition assessment of large high voltage transformers using dissolved gas analysis (DGA).

Complete DGA – Moisture

Avoid what could become a costly transformer failure by choosing our new generation of multi-gas on-line monitors. The Calisto 9 is a powerful tool for transformer condition assessment.

Key Features

  • Measures all seven fault gases plus oxygen and nitrogen
  • Industry leading detection limits
  • Automated self-calibration using certified primary grade gas
  • Intuitive front-panel display interface
  • Built-in oil circulation and flow monitoring
  • Continuous enclosure and oil conditioning
  • Communication protocols: DNP3, Modbus, IEC 61850 (optional)
  • Vacuum tolerant
  • Substation hardened communication electronics
  • Built-in moisture and solubility coefficients for all common insulating fluids
5 Fault Gases – Moisture

Avoid what could become a costly transformer failure by choosing our new generation of multi-gas on-line monitors. The Calisto 5 is a powerful tool for transformer condition assessment.

Key Features

  • Additional measurement of Duval Triangle gases
  • Acetylene measurement from 0.2 ppm
  • Automated self-calibration using certified primary grade gas
  • Intuitive front-panel display interface
  • Built-in oil circulation and flow monitoring
  • Continuous enclosure and oil conditioning
  • Communication protocols: DNP3, Modbus, IEC 61850 (optional)
  • Vacuum tolerant
  • Substation hardened communication electronics
  • Built-in moisture and solubility coefficients for all common insulating fluids
Hydrogen – Moisture Carbon Monoxide

CALISTO 2 is Morgan Schaffer’s newest innovation for value-added transformer fault detection and monitoring. Still featuring unequalled performance and stability for the measurement of moisture and dissolved hydrogen—THE key gas for detecting incipient faults at their earliest stage—CALISTO 2 also offers independent measurement of carbon monoxide, a gas often generated in large quantities when transformer cellulose overheats. CALISTO 2 is supplied standard with DNP3.0 and MODBUS communication protocols, thus allowing easy deployment within existing communications and SCADA networks.

Key Features

  • Additional measurement of dissolved carbon monoxide
  • Built-in oil circulation and flow monitoring
  • Continuous enclosure and oil conditioning
  • Communication protocols: DNP3, Modbus, IEC 61850 (optional)
  • Vacuum tolerant
  • Substation hardened communication electronics
  • Built-in moisture and solubility coefficients for all common insulating fluids
Hydrogen-Moisture

CALISTO is a simple and reliable system for detecting transformer incipient faults at their earliest stage. It provides unequalled stability at low concentration levels and is field-installable in less than 2 hours. The monitor offers additional value through on-line monitoring of dissolved water and can be easily networked for monitoring entire substations. Used in conjunction with other MSS products, such as our Myrkos Portable Fault Gas Analyzer, CALISTO becomes a key element in managing critical transformers.

Key Features

  • Precise and accurate hydrogen and moisture readings
  • Built-in oil circulation and flow monitoring
  • Continuous enclosure and oil conditioning
  • Communication protocols: DNP3, Modbus, IEC 61850 (optional)
  • Vacuum tolerant
  • Substation hardened communication electronics
  • Built-in moisture and solubility coefficients for all common insulating fluids
Accuracy, Speed and Repeatability

Offering repeatability better than or equal to ASTM D 3612 or IEC 60567, the MYRKOS Portable DGA MicroGC measures separately the seven most significant fault gases within 120 seconds. In addition, the instrument measures both air components (oxygen and nitrogen) using a specially designed O2/N2 kit.

Key Features

  • Interference-free measurement of all nine gases
  • User-friendly calibration system using certified primary gas
  • Generates precise and accurate results within two minutes of injection
  • Intuitive step-by-step on-screen operation
  • Interface software in six languages
  • Built-in diagnostic tools
  • Built-in solubility coefficients for all common insulating oils
Lab Package

The Myrkos Lab Package offers the powerful combination of our Myrkos DGA MicroGC with a Syringe Shaker to deliver enhanced performance and sample throughput.

Key Features

  • Compliant with ASTM D3612-02 and IEC 60567
  • Chromatography engine
  • Automated Shake Test® method using the innovative Syringe Shaker
  • Generate DGA one-pager reports in PDF format
  • Export data to third party advanced diagnostic software
Field Package

Built for predictive maintenance, the Myrkos Portable DGA MicroGC comes with a wide variety of accessories appropriate to all circumstances. Clients can choose between two configurations: Field or Lab, or create their own package according to their needs.

Key Features

  • All-in-one rugged carrying case
  • Cordless operation with seven hours’ autonomy
  • Li-ion rechargeable battery with state of charge indicators
  • Ready-to-use miniature portable controller
  • Removable carrier gas module for practical refilling
  • 40% increased carrier gas module capacity
  • Built-in O2-N2 extraction gas port

OIL STANDARDS

Unique in the world, Morgan Schaffer’s oil standards are crucial when it comes to evaluating laboratory performance. Meant to be used as a benchmark, True North and Atlantis standards are the only way to calibrate complete laboratory test procedures.

DGA precision and accuracy is critical to your operation

Excellent for client or laboratory assessment of analytical performance using blind samplesDissolved Gas Analysis (DGA) is the most effective way of detecting incipient faults in oil-filled electrical equipment. The accepted methods for performing DGA are outlined in the ASTM D3612 and IEC 60567 standards. 

Precise and accurate dissolved moisture-in-oil results are also crucial to your clients’ transformer maintenance decisions. With Atlantis, you can continuously validate the precision and accuracy of your Karl Fischer* method.

INSIDE VIEW – DGA SOFTWARE

Having trouble understanding or knowing what to do with your overwhelming amount of DGA data? Click here to find out how Inside View can help.

Key Features

  • Automatic centralization of DGA data
  • Complete diagnostic tools
  • Alarm management and gassing rate
  • Easy deployment and IT friendly